Pobeda boilers
AllSemi-automaticAutomaticDeliveryAbout
8-920-381-44-94 8-800-234-97-79
mail@kotel-pobeda.ru

Русский
Order a consultation
8-920-381-44-94 8-800-234-97-79
AllSemi-automaticAutomaticDeliveryAbout
Order a consultation
8-920-381-44-948-800-234-97-79

Assemble your solution

Take the 6-question test and get your turnkey solution at a discount

1. Select the type of boiler

Next Skip

2. Specify the heated area of the room

Next Skip

Semi-automatic boilers do not have remote control.

You can go back and choose an automatic boiler.

3. Remote control of the boiler

With standard automation, you simply set the required temperature of the coolant and the automation in the boiler itself regulates the air supply to the chamber, the intensity of combustion and the temperature of the coolant.

Each automatic, that is, pellet boiler can be additionally equipped with a special remote control unit, with the help of which you can control your boiler at any distance, as well as you can monitor the state of the boiler and the temperature of the coolant, the temperature in each room, the hot temperature. water, etc.

To implement this function, you need a smartphone of the system:

Android

iOS

Or any other device that supports the installation and use of programs from PlayMarket or AppStore.

You just install one E-modul program, make the settings and that's it - home heating is in your pocket!

E-modul program
Next Skip

4. Select boiler autonomy

To increase the operating time of semi-automatic boilers on one fuel tab, you must additionally install in your heating system:

Heat accumulator from 300 liters

Which will provide heat
to the room for an additional
3/hours
In order for your boiler to work for three days or more, you need to opt for an automatic boiler (pellet boiler with a torch burner).
Such a boiler will work on:

  • Pellets

Which will provide heat
to the room for an additional
3/days or more
If you need the boiler to work in a completely autonomous mode for a long time, then you need to choose an automatic pellet boiler with an increased hopper.
We will make a pellet silo for your boiler:

500Liters

1000Liters

2000Liters

Able to provide heat to your premises
in an autonomous mode for
3/weeks or more
Next Skip

Semi-automatic boilers do not have climate controlled.

You can go back and choose an automatic boiler.

5. Select climate control

Now, various climate control systems are very popular, which, thanks to their special configuration, allow you to maintain the required climate in the room at any time of the year. Thanks to them, it is possible to establish a suitable temperature regime in the house, which will allow not only to moisten it, but also to clean it using special filtration.

Single-zone climate control in automatic boilers is a temperature sensor that CAN BE:

Internal

External

This sensor measures the temperature in your room (or outside) and on the basis of these readings, the boiler itself regulates the intensity of combustion and the temperature of the heat carrier in order to maintain the air temperature in the room you have set.

It is possible to install equipment to maintain different temperatures at different times of the day

Two-zone climate control is arranged according to the principle of one-zone, however, two or more sensors are already involved in it and it is necessary to use a simple collector group in the heating system. All this will help you to provide different temperatures in two different rooms (in two types of rooms).
For example, in the living room, in the bathroom +25, and in the bedrooms, in the corridor and in the kitchen +22 degrees. It is also possible to install equipment to maintain different temperatures at different times of the day.
Eight-zone control already implies the installation of 3 to 8 sensors in different rooms of your house or building. At the same time, in each room it is possible to maintain its own set temperature, while, again, at different times of the day it can be different at your discretion!
To implement this scheme, an additional installation in your heating system of a collector group for 3-8 branches is required in order to be able to distribute the heat carrier with different temperatures in different rooms.
Next Skip

6. Get a discount

The selected parameters are fixed, fill in the contact information and we will send you a quote with a discount

Selected options:

automatic boiler
semi-automatic boiler
elongated boiler
AutomaticSemi-automaticDeliveryAbout Privacy policy
© Pobeda 2018
Made in "Mediaset"
© Pobeda 2018
|
Made in "Mediaset"

Find out where to buy in your city